test-stand-act-1000n-kiem-tra-luc-moi-han-luc-moi-noi-hans-schmidt.png
capacity max. 1000 N

Motorized wire pull tester for soldered or solderless wire terminals, crimped connectors and similar wire terminations

Rugged desktop device with integrated force sensor

Special Features

 
Test stand ACT-1000N for testing accordance UL486A-486B and JIS C2805 standards
 
For wires with diameter between 1 up to 8 mm
 
Terminal grip with 12 slots from 1 up to 8 mm
 
2 selectable modes:
– Break Mode: to capture peak force
– Keep Mode: to apply the adjusted force for a specified time
 
To store test conditions for 25 samples (name, mode, speed, force)
 
Internal memory for recall readings at the display or transfer to a PC with software free of charge
 
Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relay output
 

Available Models

Model Capacity Resolution Speed mm/min
ACT-1000N 0 – 1000 N 1 N 10/25/50/100
ACT-1000N-V300 0 – 1000 N 1 N 25/50/100/300

 

Capacity: 1000 N
Resolution: 1 N
Accuracy: ±0.5 % full scale ±1 Digit
Wire diameter: 1 – 8 mm
Terminal grip slot: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6, 7 and 8 mm
Sampling rate: 2000 times/sec
Selectable units: N, kgf, lbf
Stroke: 50 mm
Sample length: 100 mm and longer
Overload protection: 150 % FS* (symbol flashes at 110 %)
Output signal: USB, RS-232
Power supply: 100 – 240 V AC
Temperature range: 0 – 40 °C
Air humidity: 80 % RH max.
Dimension: 400 x 240 x 150 mm (LxWxH)
Weight: Approx. 11 kg