Ramsey Thermo Fisher – 60-200-DC 042663 – Giám sát chuyển động

Hỗ trợ trực tuyến

ramsey-thermo-fisher-–-60-200-dc-042663-–-giam-sat-chuyen-dong.png

Ramsey Thermo Fisher – 60-200-DC 042663 – Giám sát chuyển động

Nhà cung cấp: Song Thành Công

Liên hệ tư vấn

Ms. Trinh

stc1@stc-vietnam.com

0915159944

live:.cid.32dc366d67c3df36

Thông tin sản phẩm
Thông số kỹ thuật

Ramsey Thermo Fisher – 60-200-DC 042663 – Giám sát chuyển động – STCVietnam

Ramsey Thermo Fisher – 60-200-DC 042663 – Giám sát chuyển động – STC Vietnam

Vui lòng liên hệ Công Ty Song Thành Công để được hỗ trợ giá tốt nhất.

100% US Origin	RAMSEY Vietnam	Model: 60-200-DC Motion Sensing Motion Monitor 60-200-DC (P/N 042663)
100% US Origin	RAMSEY Vietnam	Model: SPS-2E-3-4-NPT Pull Sensor (142205) Ramsey Safety Pull Switch (Replace for SPS-2D-3)

Thermo Scientific Ramsey Model 60-200 Motion Monitor Controllers

Programmable Features

Reference Speed Learned when operator presses and holds “Select” key for five seconds
Start-Up Delay(s) 1-99 seconds, programmable in one-second increments
Alarm Set-point(s) 0%-160% of reference speed, programmable in 1% increments
Alarm Delay(s) 1-99 seconds, programmable in one-second increments
Reset Mode Selectable: Power On or both Power On and Remote Relay Input
Begin Start-Up Delay Selectable: Power On or First Speed Pulse
Alarm Clear Selectable: Manual Reset (latched) or Automatic Reset (unlatched)

General Features and Specifications

Speed Display Internal LED displays current speed as a percentage of reference at touch of a key
Error Display Internal LED displays error messages to alert user of programming errors or system faults
Internal Memory Non-Volatile memory stores all programming during power loss
Enclosure Fiberglass (NEMA 4X), optional steel (NEMA 4) enclosure available
Speed Output Proportional to rotational speed, 0 to 2 VDC output (1 VDC equals 100%); or Optional analog current output signal
(Selectable 4-20 mA or 0-20 mA) available
Alarm Contacts DPDT Relay(s) 230 VAC, 5A Non-Inductive 2A Inductive (Selectable NC/NO)
Operating Range Maximum input speed pulse rate = 1000 Hz; Minimum input speed pulse rate = 0.2 Hz (5 seconds in between pulses)
(Hz = RPM x Pulses per Revolution / 60) Note: low pulse rates may limit how low the Alarm Set-point can be adjusted
Power Consumption 10 Watts nominal (15 Watts maximum)
Max Wiring Distance 610 m (2000 ft) between controller and sensor when running at 300 Hz or less

Model Specific Specifications

Input Power Voltage 60-200-SC: Selectable 115/230 VAC (50/60 Hz) ±10% 60-200-DC: 85 to 250 VAC (50/60 Hz)
Operating Temperature 60-200-SC: -40°C to +50°C (-40°F to +122°F)
60-200-DC: -40°C to +85°C (-40°F to +185°F)
Alarm Outputs 60-200-SC: One adjustable alarm with (1) DPDT relay
60-200-DC: Two independently adjustable alarms with (1) DPDT relay per alarm
Sensor Input 60-200-SC: NPN
60-200-DC: NPN, PNP, or Namur
Supply Voltage to Sensor 60-200-SC: 12 VDC, 75 mA
60-200-DC: 12 VDC, 150 mA

Thermo Scientific Ramsey Model 60-220 Proximity Speed Sensors

General Specifications
Output Open collector NPN, up to 200 mA current sinking
Operating Temperature -25°C to +70°C (-13°F to +158°F), lower temp rating available upon request
Sensor to Target Range 60-22H High Speed system: 30-mm sensor has a 10-mm (0.394-in) nominal gap
60-22L Low Speed system: 12-mm sensor has a 4-mm (0.157-in) nominal gap
Detection Indicator LED on sensor lights when target is in range, helpful for adjusting sensor position and troubleshooting
Cable 6-m (20-ft) standard cable length, optional longer cables available
Sensor Housing Chrome plated brass with plastic face, stainless steel housings are available
Hazardous Area Approvals FM approved for Class I & II, Division 2 (not for use in Canada)

Hãy liên hệ với chúng tôi để nhận được hỗ trợ tốt nhất các giải pháp tối ưu tự động hóa cho ngành công nghiệp từ đội ngũ STC – Công ty TNHH DV TM Song Thành Công.